Table of Contents
Advertisement
CONNECTION SETUP
TIMEOUT
RETRY COUNT
SELECT MENU : ▲▼, & [ENTER]
(2) CONNECTION SETUP :
- TIME OUT : Adjust TIMEOUT value properly to successfully access to DVMR unit via Internet
line. If data transmission speed is high enough, leave TIMEOUT value as set by
manufacturer (200 msec), and increase it if data transmission via Internet line is
relatively slow. Execute tracert (Tracing Route) in your PC for IP assigned to
DVMR unit, and you can figure out how much TIMEOUT value increased.
- RETRY COUNT : Set the retry number of times for network connection.
2) RS-232C SETUP
User can control the DVR via RS-232C port.
Connect DVR to PC via RS-232C port and control
DVR using keyboard of PC.
This function is mainly for programmer who
wants to control DVR as part of many devices
connected to PC system, as in SI project.
3) PAN/TILT SETUP
It is to set parameters for PTZ camera connected to DVR unit. DVR unit already includes all
protocols of well-known PTZ cameras like PELCO D type PTZ camera, and user just select MODEL
and set other parameters to control this PTZ cameras, using operation buttons on the front panel of
DVR. If PTZ camera whose protocol is not incorporated into this DVR unit, user must input protocol
of this PTZ camera by himself. Using USB device port, user can upgrade protocol for PTZ camera.
PAN/TILT SETUP
COMMAND SETTING
SPEED SETTING
SELECT : ▲▼, & [ENTER]
1) CHANNEL : Select channel which PTZ camera is connected
2) MODEL : Select camera model (protocol type)
3) PTZ ID : Set ID, same as PTZ camera's
4) BAUDRATE : Select data transmission speed (Please refer to the camera's)
5) CMD DELAY : Select command delay time
200 MSEC
08
PTZ camera set
PTZ speed set
29
DHCP SETUP
DHCP MODE
DNS SERVER
IP ADDRESS
SUBNET MASK
GATEWAY
SELECT : ▲▼, CHANGE VALUE : + -
RS-232C SETUP
SPEED
LENGTH
STOP BIT
PARITY
SELECT : ▲▼, CHANGE VALUE : + -
COMMAND SETTING
CHANNEL
01
MODEL
PELCO-D
PTZ ID
000
BAUDRATE
2400 BPS
CMD DELAY
1 MSEC
COMMAND
PAN/TILT STOP
LENGTH
0.7
CODE
FF 00 00 00
00 00 00 00
SELECT : ▲▼, CHANGE VALUE : + -
CHAP. 5 Set Up
MANUAL
000.000.192.168
192.168.001.160
255.255.255.000
192.168.001.001
576000
8
1
NONE
Advertisement
Table of Contents
