Record Setup; Record Configuration - Security Labs Best Picture Quality - JPEG2000 User Manual

8-channel stand-alone dvmr
Table of Contents

Advertisement

5-4. RECORD SETUP

This is the most important configuration of the DVR.
Enter into SYSTEM MENU-RECORD SETUP
and press the [ENTER] button.

1) RECORD CONFIGURATION

Use direction button to move and [
(1) OVERWRITE : Set overwrite or stop recording when
(2) MULTIPLEX
- DUPLEX : Playback & Ethernet
- TRIPLEX : Playback & Recording & Ethernet
※ Note: DUPLEX MODE is recommended to playback
the images at a maximum frame rate.
But, it makes DVR not to record during search.
(3) QUALITY : Set recording picture quality.
Actually it is fixing maximum data size of
image for each picture quality in 5 steps
as follows.
-
BASIC
- NORMAL
- ENHANCED
- FINE
Default quality set by manufacturer
- SUPER FINE:
In Emergency recording mode, recording quality is
SUPER FINE.
To send more images via IP network and longer recording
time, set QUALITY at NORMAL or ENHANCED and
record at 360x120(360x144).
※ Data size of image in PAL system is a little bigger than NTSC system, but the total recording time
is same as in NTSC system.
(4) RESOLUTION : Set recording resolution.
- 120 ips at 720x240(NTSC) , 100 ips at 720x288(PAL)
- 240 ips at 360x240(NTSC) , 200 ips at 360x288(PAL)
- 480 ips at 360x120(NTSC) , 400 ips at 360x144(PAL)
※ It is not possible to see those images in full screen mode in playback.
Recording in Dual resolution is recommended for higher recoding speed, and also to send
more images via IP network.
(5) RECORD IN ALARM : Set record speed (skip rate) in ALARM record mode.
(6) RECORD IN MOTION : Set record speed (skip rate) in MOTION record mode.
(7) CONTINUOUS RECORD : Set record speed (skip rate) in CONTINUOUS record mode.
Set record speed (skip rate)
- 1/1x, 1/2x, .......... 1/999x record speed
- ex: 1/2x ) R->S->R->S...
- ex: 1/4x ) R->S->S->S->R->S->S... ( R : RECORD
- ex : If record resolution is set at 360x240, 1/1x = 120 ips, 1/2x = 60 ips, 1/3x = 40 ips, etc.
-
] [+] button to set value.
the HDD is full.
RECORD CONFIGURATION
SCHEDULE SETUP
HOLIDAY SETUP
SELECT MENU : ▲▼, & [ENTER]
OVERWRITE
MULTIPLEX
QUALITY
RESOLUTION
RECORD IN ALARM
RECORD IN MOTION
CONTINUOUS RECORD
SELECT MENU : ▲▼, CHANGE VALUE : + -
- ex: 1/3x ) R->S->S->R->S->S->R...
S : SKIP )
26
CHAP. 5 Set Up
RECORD SETUP
RECORD CONFIGURATION
TRIPLEX
ENHANCED
120IPS 720*240
ON
1/1X
1/1X
1/1X

Advertisement

Table of Contents
loading

Table of Contents