Step 5, Level Refrigerator; Step 6, Secure Refrigerator To Cabinetry - GE ZIC360N RH Design & Installation Manual

Installation Instructions
ISTEP 5] LEVEL REFRIGERATOR
All models have 4-point leveling. The front is sup-
ported by leveling legs, the rear is supported by
adjustable wheels. Both are accessible from the front
of the refrigerator.
* To level the back of the refrigerator, turn the 7/16"
hex nut located above the front wheels. Turn
clockwise to raise or counterclockwise to lower the
refrigerator.
* For front leveling, use a 1-1/4" open-end wrench.
* Adjust height of refrigerator to match installation
cutout opening 83-1/2 to 84-1/2". The refrigerator
should be level and plumb with cabinetry.
ISTEP 6] SECURE REFRIGERATOR
TO CABINETRY
Whenever possible, perform this step for anti-tip
security, or when anti-tip brackets cannot be used.
The refrigerator must be secured to prevent tipping.
, Raise the grille panel to access case trim.
, Drill hole in trim and drive screw through the trim
into adjacent cabinet.
* Follow the same procedure on the opposite side.
/
Drive Screws
Through CaseTrim and Into
AdjacentCabinets
12