Step 2A, Rowater Line; Step 3, Install Side Panels - GE ZIC360N RH Design & Installation Manual

Installation Instructions
[STEP 2A] WATER LINE
INSTALLATION WITH A REVERSE
OSMOSIS SYSTEM
Skip this step when not using an RO System
If the water supply to the refrigerator is from a
Reverse Osmosis Water System use the refrigerator's
filter bypass plug. Using the refrigerator's water
filtration cartridge with the RO filter can result in
hollow ice cubes.
I
FilterBypassPlug
I
[STEP 3_ INSTALL SIDE PANELS
Skip this step when not using side panels
If you are using 1/4" side panels, they should be
inserted into the case trim. Fasten the panels to the
refrigerator with stick-on hook and loop fastener
strips before setting refrigerator in place.
[STEP 41 INSTALL ANTI-TIP
BRACKETS
WARNING: ANTI-TIP PRECAUTIONS
The refrigerator is top-heavy and must be secured to
prevent the possibility of tipping forward.
ATTENTION:
P RECAUTIONS CONTRE LES
BASCULEMENTS
Le r_frig_rateur est beaucoup plus Iourd en haut et il
faut le maintenir en place pour Oviter la possibilitO de
son basculement vers l'avant.
• Cut a 2" x 4" x 35" block and secure the block to
the mounting brackets provided using #12 or #14
wood screws.
2x4Cut J
35" Length
Installation Mounting
Height Bracket
FromFloor
ScrewsMountedintoJ
VerticalWall Studs
• Secure the bracket with wood block to the back wall
so that it is 84" (or your installation height) from the
finished floor. Use #12 or #14 wood screws. See
illustration.
Brackets
Required
_1 NotRequired
Height
From
Floor
to
Bottom
of Wood
Block
SideView
• Screws must penetrate at least one inch into vertical
wall studs.
• Gently push refrigerator into the opening with
hands against front corners.
Important Note: Whenthe refrigeratoris installedundera soffit or if
thereis not enoughheightForthis methodof security,bracketscannot
be used,Proceed to step 5 to levelthe refrigeratorandthento step 6to
securerefrigeratorto cabinets,Therefrigeratormustbe securedto
preventtipping,
11