Team Grill PMV06091 User Manual page 23

B. Loosen 2 Bolts on each of the side panels on the rear of the Firebox Unit as shown below. Do not completely
remove the Bolts from the Firebox Unit as these will be used to hang the side shelves in Step 8C.
Loosen these bolts
on each side of the
Firebox Unit. Do
not remove them
completely.
C. Attach the Right Side Shelf and Left Side Burner/Shelf by placing the keyholes over the loosely tightened
Bolts on each side of the Firebox Unit. Now tighten all 8 Bolts from Steps 8A and 8B. Extend the side shelves
to allow for easier access when tightening the Bolts.
Place the keyholes over the
half-tightened bolts and
allow the shelf to rest on
the bolts. Then, tighten
each bolt. Repeat for the
other shelf on the other
side of the grill.
Team Grill Patio Series User Guide Page 23