Assembly Instructions - Team Grill PMV06091 User Manual

Assembly Instructions

Step 1. For Team Grill Patio Series MVP models (PMV06091 and PMV06094), attach the Castors to the Base Panel
using 16 M6*12 Bolts and 4 M6 Nuts. Attach the 2 Non-Locking Castors under the side of the Sliding Tank Tray as
shown below.
For Team Grill Patio Series PRO models (PPR06091 and PPR06093), attach the Castors to the Base Panel using 16
M6*12 Bolts and 4 M6 Nuts. Attach the 2 Non-Locking Castors under the side with the hole for the LP gas tank as
shown below.
MVP
Step 2. For Patio Series MVP models (PMV06091 and PMV06094), attach the Sliding Tank Tray to the Base Panel
using 8 M6*12 Bolts and 8 M6 Nuts.
Team Grill Patio Series User Guide
For MVP model, attach the
locking castors on this end.
Use bolts and nuts for the
4 front holes. The other
holes only require bolts.
PRO
Page 19