Step 8, Install Filters; Step 9, Finalize Installation - GE Monogram ZV830 Installation Instructions Manual

Installation Instructions
INSTALLATI0 N--R ECIRCULATING
i81 INSTALL FILTERS
IMPORTANT: Check to be sure that the main ON/OFF
switch next to the motor is in the ON position.
Push-button
switch
(horizontal
view from
inside
opening)
• Remove protective films on the grease filters and
filter cover panel.
• Insert the black charcoal filter into the opening.
Push the latch on both sides toward the center
and engage the flange. Release latches to secure.
0 0
• To remove the filter, push the latches toward
the center and pull downward.
• Install the metal grease filter into the hood
support channels directlg below the charcoal
filter.
0
NOTE: The charcoal filter should not be used
without the metal filter secured below.
• To close the filter cover panel, push up on both
sides at the front corners to engage the latch.
i91 FINALIZE INSTALLATION
• Remove all tape and packing material.
• Refer to the Owner's Manual for operating
instructions.
18