Installation Preparation
DETERMINE INSTALLATION
HEIGHT
• Telescopic
duct
covers
are provided
to conceal
the ductwork
running
to the
ceiling.
• This hood
can be installed
for vented
or
recirculating
operation.
All necessarg
parts
are
shipped
with
the hood.
24" Minimum
30" Maximum
m
36" Minimum
II
NOTE: Installation
height should be measured from
the cooking surface to the bottom
of the hood.
The vent hood must be installed 24" min. and
30" max. above the cooking surface. The hood
installation
height, from the cooking surface to the
bottom of the hood, depends upon ceiling height
and duct cover limitations.
DUCT COVER DIMENSIONS
9-7/16"
15-3
Z×8510SPSS
Duct Cover Accessory
The accessorg is available for installation with ceiling
heights of 8' 7" to over i0 feet. This accessorg
consists of two 26-1/4" duct covers and one 31"
upper support frame piece.
ZV850/ZV855
Installation
Heights
*Possible
RECIRCULATING
Installation
Height
24"
24" to 25"
24" to 26"
24" to 27"
24" to 28"
24" to 29"
24" to 30"
25" to 30"
26" to 30"
27" to 30"
28" to 30"
29" to 30"
:30"
24"
24" to 25"
24" to 26"
24" to 27"
24" to 28"
24" to 29"
24" to 30"
24" to 30"
24" to 30"
24" to 30"
24" to 30"
24" to 30"
24" to 30"
24" to 30"
24" to 30"
24" to 30"
25" to 30"
26" to 30"
27" to 30"
28" to 30"
29" to 30"
:30"
*Based on 36" countertop
height.