6.1.2
CAN Test
1. CAN: Console PC, install [PCAN_USB-to-CAN] test program, and use USB to
CAN fixture to connect to TREK-550 CAN port.
2. Execute PCAN-View USB→ Set Baud rate 250kBit/s→ Select [Extended]→OK→
Transmit → New → ID(Hex) key in number → Data key in any number→[Period]
key in 100ms→Click [Extended Frame]→OK. See below figure 6.
Figure 6. 5 PCAN-View for USB -1
Figure 6. 6 PCAN-View for USB -2
www.advantech.com