Trek-550 Power Consumption; Gpio Test - Advantech TREK-550 User Manual

6.3.4

TREK-550 power consumption

OS: Windows Embedded Standard
Burn-in test V6.0
w/o TREK-303H
w/ TREK-303H
*Doesn't support S1, S3, S4
6.4

GPIO Test

1. Execute I/O Test, connect GPIO loopback, click Pin0→Set, the end which Read
the signal, the bulb will be light up, like wise to Pin1~Pin3. Next pick Digital output
to execute the same procedure. See figure 6.
Figure 6.16 DI/O test
a. Digital Output  isolated relay driver output
b. Digital Input  isolated dry contact input
TREK-550 User Manual
www.advantech.com
Idle Mode 100% Burn-in Test Mode
12V / 1.04A 12V / 1.20A
12V / 1.51A 12V / 1.94A
41
Off mode (S5)
12V / 1.75mA