Table of Contents
Advertisement
4.5.2
Dome Protocol Setup
The Dome Protocol item lists the available dome protocols for communicating
with dome cameras connected to the DVR. From the Main menu, select
<Camera Setup> and press ENTER. The following menu is displayed.
1. Analog Camera Select
2. Dome Protocol
3. Dome ID
4. Camera Title
5. Covert
6. Termination
7. Brightness
8. Contrast
9. Saturation
10. Hue
To configure dome protocol, select a camera first and set the communications
protocol associated with dome camera using the Direction keys and ENTER.
The available protocol includes <DynaColor>, <AD422>, <Pelco D>, <Pelco
P>, <Fastrax 2>, <JVC>, <Panasonic_C>, <Panasonic_N>, and <None>.
NOTE: The settings become effective after saving the changes and
exiting from the menu.
4.5.3
RS485 Setup
The DVR controls the domes via RS-485 communication protocol. The
RS-485 parameters of the DVR must be set to the same as the parameters
set in dome camera.
Users are allowed to change the RS-485 settings of the DVR. Select <System
Setup> in Main menu, then select <RS485 Setup> from the System Setup
menu and press ENTER. The following menu is displayed.
1 Unit ID
2 Baud Rate
3 Bits
4 Stop
5 Parity
Analog Camera
RS485 Setup
DVR User's Manual
CH1
None
0
CH1
No
Yes
0
0
0
0
224
9600
8
1
None
45
Advertisement
Table of Contents
