Exception Text Setup - Okina Professional H.264 DVR User Manual

DVR User's Manual
3.7.3

Exception Text Setup

This sub-menu is used to define the conditions that are to be treated as an
"Exception" and thus trigger an action (the function will be implemented later).
Exception No.
Exception No.
Select a number to set the exception parameters. The total is 16 exceptions.
Trigger
Select <ON> to monitor if transactions satisfy exception parameters. Once an
exceptions is found, alarm will be triggered.
Exception String
Users can define Exception String. The "Exception String" is case-sensitive.
Only exactly matched ones will be marked as exceptions.
By Numerals
"Exception String" must be defined before "By Numerals" takes effect. If "By
Numerals" is enabled, only transactions which meet both "Exception String"
and "By Numerals" creteria will be marked as exceptions.
The selections are as the following:
<OFF>: The function is disabled.
<Specific>: When the value of a transaction meets a specific value, it will be
<Greater Equal Than>: When the value of a transaction is greater then or
<Less Equal Than>: When the value of a transaction is less than or equal to
30
Exception Text Setup
Trigger
Exception String
By Numerals
Value
Value (Upper Limit)
marked as an exception. That specific value need to be defined
in the following sub-setting <Value>.
equal to a certain value, it will be marked as an
exception. That specific value need to be defined in
the following sub-setting <Value>.
a certain value, it will be marked as an exception. That
specific value need to be defined in the following
sub-setting <Value>.
1
ON
NO SALE
OFF