Table of Contents
Advertisement
The keys of the remote control function as the keys of the front panel of the DVR. The
difference between the remote control and the front panel is the "DVR SEL" key. The DVR
Selection key is used to switch control between different DVRs.
The remote control can be used to control up to 16 DVRs. To setup the remote control, the
first thing is to assign a unique DVR Unit ID to different DVRs.
Use the front panel of the DVR, and follow this path to change the DVR Unit ID, <Main
Menu>
<System Setup>
any number between 224 and 239, and exit the menu.
The ID Table is listed below for reference.
DVR Unit ID
Remote Control #
DVR Unit ID
Remote Control #
After the DVR Unit ID is changed, setup the "DVR SEL" of the remote control. Press "DVR
SEL", and then press the Remote Control # immediately to select the DVR. For example,
assuming that the DVR Unit ID is set to 225, press "DVR SEL" and press "2" immediately.
Now, the remote control will only be able to control the specified DVR. Press "DVR SEL",
and then press the Remote control # to switch between DVRs.
To exit the single DVR control mode, press "DVR SEL", and then press "ESC" to do so.
<RS485 Setup>
<Unit ID>. Change the DVR Unit ID to
224 225 226 227 228 229 230 231
1
2
3
4
232 233 234 235 236 237 238 239
9
10
11
12
DVR User's Manual
5
6
7
8
13
14
15
16
65
Advertisement
Table of Contents
