Okina Professional H.264 DVR User Manual page 72

Step 5. Access the OSD setup menu of the DVR to select the number of IP cameras to be
connected: <System Setup>
order to apply the change.
Step 6. Access the <Camera Setup> menu of the DVR to setup the IP camera. Select the
channel that is reserved for IP camera. The menu should look like the following:
1. IP Camera Select
2. IP Camera Title
3. Hostname/IP
4. Model
5. Connection Setup
6. Device Setup
7. Activated
8. Status
Step 7. Enter the Hostname/IP as 192.168.1.242 and select model as NH Series.
Step 8. Access the <Connection Setup> menu to enter connection setting parameters:
Account=Admin, Password=1234, Management Port=80, and Streaming
Format=MPEG4 or MJPEG. If Advance Streaming Option is set to <OFF>, the
Streaming Port and Streaming Protocol will be setup automatically. If the
parameters are different, set Advance Streaming Option to <ON> and the values
can be modified manually.
1. Account
2. Password
3. Management Port
4. Streaming Format
5. Advance Streaming Option
6. Streaming Port
7. Streaming Protocol
8. IP Dome Protocol
Step 9. Access the <Device Setup> menu to enter device setting parameters: Image
Resolution=quadvga, Sharpness=128, Brightness=25, and Compression=128.
1. Product ID
2. Image Resolution
3. Sharpness
4. Brightness
5. Contrast
6. Apply
<IP Camera Support>. The DVR will reboot in
IP Camera
Connection Setup
Device Setup
DVR User's Manual
CH16
CH16
192.168.1.242
NH Series
No
Admin
****
80
MPEG4
OFF
554
RTP+RTSP
NONE
NH Series
vga
128
25
128
No
71