PC Configuration>>
•
On your PC, click <Start>
<Create New Connection>
<Connect using dial-up modem> to connect to the DVR through phone line.
manually>
•
Give a name to the connection. Enter the phone number of the modem connected to the DVR.
•
Enter the Dial-in Account and Password that are specified in local DVR. Click <Finish> to
establish the connection.
Establishing Dial-up Modem Connection from the DVR for Remote Notification:
DVR Configuration>>
•
Connect a USB modem to the USB socket and connect a working phone line to the modem.
•
From OSD main menu, select <System Setup>
<Dial-out Setup> to set up the Dial-out settings, including Dial-out IP, Phone Number, Dial-out
Account, etc.
PC Configuration>>
•
On your PC, click <Start>
<Create New Connection>
connections> to accept connection from the DVR.
•
Select a modem, then choose <Do not allow virtual private connections> as VPN setting.
•
Edit User Permissions list to set allowable users, or add a new user as set in the DVR.
•
Edit TCP/IP properties to assign TCP/IP address, either assign a fixed IP or choose DHCP auto
assignment. Click <Finish> to complete the process.
Dome Camera Control
Dome Camera Connection & Settings:
•
See section Pin Definition of Alarm I/O & RS-485 for RS-485 port pin definition.
•
Refer to the following figure. Connect the R+, R− terminals on the dome camera to the D+, D−
terminals on the RS-485 port by RS-485 cable respectively.
•
To set up dome camera's protocol and ID, press MENU to access the OSD main menu, and
select <Camera Setup>. The available protocols include <DynaColor>, <Pelco D>, <Pelco P>,
<AD422>, <Fastrax 2>, <JVC>, <Panasonic_C>, <Panasonic_N> and <None> (default).
Note that ID number must match the ID address defined by the dome camera.
6
<My Network Places>
<Connect to the Internet>
<Network Setup>
<My Network Places>
<Set up an advance connection>
<View Network Connections>
<Set up my connection
<Modem Setup>
<View Network Connections>
<Accept incoming