Rear Panel Connectors - Okina Professional H.264 DVR User Manual

Connecting Required Devices
Before powering on the unit, cameras and a main monitor should be
connected to the unit for basic operation. If needed, connect a call monitor for
displaying full screen video of all installed cameras in sequence.
Connecting Short-term Device
If any short-term devices shall be installed to the DVR as parts of the unit
system, such as USB ThumbDrive
those devices are connected only after the unit is powered on. The reason is
because the DVR can recognize the external devices only after the power-on
process is done completely.
2.4

Rear Panel Connectors

There are various connectors on the rear panel for the DVR installations. The
connectors are described as the followings.
Main Monitor (S-Video / BNC)
Both S-Video and BNC output connectors are
offered for connecting to a main monitor. The main
monitor
recorded video in full-screen or split-window
format.
Call Monitor (BNC)
The call monitor is used to display full screen video of all installed cameras
in sequence. The BNC call monitor connector allows user to connect the
DVR with a call monitor.
VGA OUT (Main 1 & Main 2)
Two VGA output connectors are offered for
connecting to VGA main monitors 1 & 2. The
source of image of VGA and BNC main monitors
are the same.
Video Input
A group of BNC connectors is offered for video
input streams from installed cameras. The number
of connectors is equal to the number of channels.
Video Out
Plenty of BNC connectors are positioned on the rear panel for looping out the
video input.
displays live image
®
or any USB devices, etc., make sure
and playback
DVR User's Manual
9