Device Setup; Activated; Status - Okina Professional H.264 DVR User Manual

IP Dome Protocol
If the connected device is an IP Dome Camera, then select an appropriate IP
Dome Protocol from the provided options.
3.5.3

Device Setup

Enter <Device Setup> to configure the basic settings of the IP camera. The
basic settings include the IP camera's product name, image quality, image
adjustment, etc. Set the item <Apply> to <Yes> to apply the changes.
NOTE: The <Device Setup> menu may have fewer or more menu
items according to different IP camera models.
3.5.4

Activated

Access this item and select <Yes> to activate the connection to the IP camera.
To deactivate the connection, select <No>.
NOTE: Once the connection to the IP camera is activated, menu items
<Hostname/IP>, <Model>, and <Connection Setup> will be grayed out
and cannot be accessed.
3.5.5

Status

After the connection to the IP camera is activated, users can check the
connection status. The menu will be shown as below.
1. Model
2. Streaming Format
3. Resolution
4. PPS
5. Bandwidth
6. Pkg. lost rate
The information shown on the monitor is "read only".
NOTE: For an example of step-by-step IP camera setup, please refer
to Appendix F: IP Camera Installation.
Status
640x480
20 KB/Sec
DVR User's Manual
****
MPEG4
10
0.1%
23