Appendix B Supported Input Timing Modes; Supported Input Timing Modes - Advantech FPM-3190G Series User Manual

Appendix B Supported Input Timing
B.1 Supported Input Timing Modes
The different frequencies below are already programmed in this module,
and the synchronous signal inputs are automatically recognized.
Table B.1: Supported Input Formats
Resolution
640 x 480
720 x 400
800 x 600
1024 x 768
1280*1024
Note 1: Even if the preset timing is entered, some adjustment of func-
tions such as Horizontal period, CLK-delay and display position,
are required. The adjusted values are memorized in every preset
number.
Note 2: This module recognizes the synchronous signals with near preset
timing of the frequency of the HS and Vsync, even in the case
that the signals other than the preset timing that were entered.
Note 3: Because adjustments may not fit, such as differing magnifying
ratios or, in the case that you use it except for the display timing
that was preset.
FPM-3190G User Manual
Modes
56 Hz 60 Hz
Yes
Yes Yes
Yes
Yes
Vertical Frequencies
70 Hz
Yes
Yes
28
72 Hz 75 Hz
Yes Yes
Yes Yes
Yes
Yes Yes