Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Advantech FPM-3190G Series
Summary of Contents for Advantech FPM-3190G Series
-
Page 1: User Manual
FPM-3190G Industrial Flat Panel Monitor with 19” TFT LCD Display User Manual... - Page 2 Copyright This document is copyrighted by Advantech Co., Ltd. 2005. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements to the products described in this manual at any time. Specifications are thus subject to change without notice.
- Page 3 Product Warranty (1 year) Advantech warrants to you, the original purchaser, that each of its prod- ucts will be free from defects in materials and workmanship for one year from the date of purchase. This warranty does not apply to any products which have been repaired or...
- Page 4 • Consult the dealer or an experienced radio/TV technician for help Additional Information and Assistance 1. Visit the Advantech web site at www.advantech.com where you can find the latest information about the product. 2. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance.
-
Page 5: Safety Instructions
Safety Instructions 1. Read these safety instructions carefully. 2. Keep this User's Manual for later reference. 3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning. 4. For plug-in equipment, the power outlet socket must be located near the equip- ment and must be easily accessible. - Page 6 FPM-3190G User Manual...
-
Page 7: Table Of Contents
Rack Mounting ............. 10 Figure 2.3:Rack Mounting..........10 Desktop, Swing-ARM Mounting ........11 2.2.1 Desktop Stand ............... 11 Figure 2.4:Desktop Stand for the FPM-3190G series... 11 2.2.2 Swing-ARM..............12 Figure 2.5:Swing-ARM for the FPM-3190G series ..12 Appendix A Touchscreen Installation .......14 Introduction .............. - Page 8 Language Menu ............38 C.2.8 OSD Manager ............... 39 C.2.9 Auto Configuration Menu..........40 C.2.10 Mode Information Menu..........41 C.2.11 Memory Recall Menu ........... 42 C.2.12 Exit Menu ..............43 C.2.13 Hot Keys ............... 44 FPM-3190G Series User Manual viii...
- Page 9 Introduction This chapter includes: • Introduction • Specifications • LCD Specification • Connectors • Dimensions...
-
Page 10: Chapter 1 Introduction
Chapter 1 Introduction 1.1 Introduction Advantech's FPM-3190G Series is a 19" color TFT LCD flat panel moni- tor built specifically for industrial applications. With the optional touch- screen, the FPM-3190G Series is an excellent and user-friendly system control interface. In addition to its usual application as an LCD panel monitor, the FPM-... -
Page 11: Specifications
1.2 Specifications General • Control: OSD (On Screen Display) control pad on front side • Mounting: Rack/panel/wallmount, desktop, and VESA arm • Front Panel: Aluminum, NEMA4/IP65 compliant • I/O Ports: VGA, DC power input and RS-232/USB port (Touchscreen version only) •... -
Page 12: Lcd Specifications
(DVI) Connected with a standard DVI connector thru I/O port of this unit. Only supports digital signals (S-Video) Connected with a standard S-Video connector with 4-pins thru I/O port of this unit (Video) Connected with a standard video connector of analog. It supports NTSC and PAL_B/G/I/H mode. FPM-3190G User Manual... - Page 13 Touchscreen Connector (RS-232) (Optional) This connector will be present only if a touchscreen is installed. It must be connected to the RS-232 port of the PC. The touchscreen cable is included with all orders which include the RS-232 touchscreen option. Touchscreen Connector (USB) (Optional) This connector will be present only if a touchscreen is installed.
-
Page 14: Dimensions
1.5 Dimensions Figure 1.1: FPM-3190G Cutout Dimensions 444 x 376 mm (17.48" x 14.84") FPM-3190G User Manual... - Page 15 System Setup This chapter includes: • Mounting the Monitor - Wall/Panel/Rack Mounting - Desktop Stand/Swing-ARM Mounting...
-
Page 16: Chapter 2 System Setup
Chapter 2 System Setup 2.1 Mounting the Monitor The FPM-3190G Series can be placed as you require. The versatility of the FPM-3190G mounts enable it to be mounted on your desk or any- where else. 2.1.1 Wall Mounting With wall brackets, the FPM-3190G can be mounted directly to a wall. -
Page 17: Panel Mounting
2.1.2 Panel Mounting If you need to install the FPM-3190G series on a panel mount, please release the mounting brackets by detaching four screws on rear side and fix them on up and bottom side by screws. Figure 2.2: Panel Mounting... -
Page 18: Rack Mounting
2.1.3 Rack Mounting FPM-3190G series products could be directly mount to the industrial standard 19" rack. There are four screw holes on each side of the panel. Figure 2.3: Rack Mounting FPM-3190G User Manual... -
Page 19: Desktop, Swing-Arm Mounting
2.2 Desktop, Swing-ARM Mounting The FPM-3190G Series can be mounted in other ways. You can place the desktop stand for desktop use or attach it on a swing-arm bracket. 2.2.1 Desktop Stand The desktop stand brackets are attached to the rear of FPM-3190G. -
Page 20: Swing-Arm
2.2.2 Swing-ARM Detach the mounting brackets on the rear side, then attach the FPM- 3190G series onto the Swing-ARM mount (75mm or 100mm square bracket). Figure 2.5: Swing-ARM for the FPM-3190G series FPM-3190G User Manual... - Page 21 Touchscreen Driver Installation...
-
Page 22: A.1 Introduction
Appendix A Touchscreen Installation A.1 Introduction The FPM-3190G Series’ optional touchscreens uses advanced resistive and capacitive technology. They provide more accurate sensing capacity than other technologies. The touchscreen is specially designed for tough industrial environments, and has been approved to FCC Class B stan- dards. -
Page 23: Capacitive Type
Communication Parameters • Baud Rate 9600 (default), and 19200 bps • 8 Data bits, 1 stop bit, no parity only. Interface - USB Conforms to USB Revision 1.1. If the USB is connected to the controller, the controller will communicate over the USB, and will not communicate over the serial port. - Page 24 Operating Temperature Range: -15 to 70°C for touch screen. Storage Temperature: Always store the touch screen sensor in its original shipping container between -50 and 85° C (MIL-STD- 810E). Never store touch sensors where condensation may form. FPM-3190G User Manual...
-
Page 25: Resistive Touchscreen Driver Installation
A.2 Resistive Touchscreen Driver Installation A.2.1 Hardware Touchscreen controllers must be configured for the driver prior to instal- lation. Elo typically ships controllers in a default setup that is compatible with this driver. Controller requirements are: Serial Serial controllers must conform to these minimum requirements: •... -
Page 26: Software
CDROM: \\TouchScreen-DRV\ELOTOUCH\Win2K\SetupElo.exe Single monitor, serial controller Run the self-extracting zip file to unzip the files, using the Run EloSetup option EloSetup will launch. Check the "Install Serial Touchscreen Driv- ers" box. Review and accept the License Agreement FPM-3190G User Manual... - Page 27 Check "Auto-detect Elo devices" if your touchmonitor serial cable is connected to the computer and the serial cable supports hardware handshaking. If you connect the serial cable later, do not check the "auto-detect" box. Go to the next screen. A list of all the serial ports that the system detected is shown. If you checked the auto-detect box in the previous screen, and your touch- monitor serial cable is attached to the computer, the COM port that you selected should be checked in the list.
- Page 28 (the Elo Video Align- ment program, EloVA) immediately or wait until later. If you choose not to run this program now, you can run it from the Elo Control Panel application. FPM-3190G User Manual...
- Page 29 Multiple monitors, serial controllers Follow the general procedure for Single monitor, serial controller installation above, auto detecting or selecting all the serial ports that you will use. The driver files will install. When the "Setup Complete" screen appears, you may choose to run calibration (the Elo Video Align- ment program, EloVA) immediately or wait until later.
- Page 30 To Silent install for USB controllers use EloSetup /iu /s To Silent install for a Serial controller on COM1 use EloSetup /is /P:1 /s To view all the options available for this installation method, run EloSetup as EloSetup /h. FPM-3190G User Manual...
- Page 31 • Adding Additional Serial Controllers Click on the Change option from the Add/Remove programs in the Con- trol Panel, Elo entry. Appendix A...
- Page 32 • Change Serial Port To change Serial port click on the Change option from the Add/Remove programs in the Control Panel, Elo entry. FPM-3190G User Manual...
- Page 33 • Adding Additional USB Controllers If there are Elo USB devices already installed, plug the USB cable from the touchmonitor into the computer and run EloVA to calibrate the touch- monitors. If there are no Elo USB devices attached to the system, click on the Change option from the Add/Remove programs in the Control Panel, Elo entry.
- Page 34 FPM-3190G User Manual...
- Page 35 Supported Input Timing Modes...
-
Page 36: Appendix B Supported Input Timing Modes
Note 3: Because adjustments may not fit, such as differing magnifying ratios or, in the case that you use it except for the display timing that was preset. FPM-3190G User Manual... - Page 37 OSD Operation Keypad...
-
Page 38: Appendix Cosd Operation Keypad
Move the selector to the previous option. Decrease the gauge value of the selected option. Menu/Sel Activate the OSD menu. Enter/confirm the selected option. Source Changes Input video source C.1.2 LED Function Green StandBy/OFF Green Blinking No Signals Orange FPM-3190G User Manual... -
Page 39: Osd Key Functions
C.2 OSD Key Functions Each selected value is stored into LCD memory after SEL signal input or time out. The stored values are not affected if the power is turned off. But the selected value is not available in case a selected mode is changed before time out or power is turned off before time out. -
Page 40: Input Source Select
• Sub-Menu – DISPLAY IN SCREEN • Available Key Functions Power Off the Increase the gauge LCD Monitor value of the selected option. Return to last menu Selected to confirm Decrease the gauge value of the selected option. FPM-3190G User Manual... -
Page 41: Contrast/ Brightness Setting
Auto Select Input • ON start from default setting and scan the inputs by following sequence from ANALOG INPUT, DIGITAL INPUT, S-VIDEO INPUT, and CVBS INPUT. • OFF start from default setting C.2.3 Contrast/ Brightness Setting • Generate Main Menu Select by Left and Right Button, press Menu Button for selection confirmation... -
Page 42: Geometry Menu - For Dvi Input
Switch the setting change by Rec1 and Rec2 while pressed C.2.4 Geometry Menu – For DVI Input • Generate Main Menu Select by Left and Right Button, press Menu Button for selection confirmation • Main Menu -- DISPLAY IN SCREEN • Sub-Menu – DISPLAY IN SCREEN FPM-3190G User Manual... - Page 43 • Available Key Functions Power Off the Increase the gauge value LCD Monitor of the selected option. Return to last menu Selected to confirm Decrease the gauge value of the selected option. Appendix C...
-
Page 44: Color Temperature Menu
• Sub-Menu – DISPLAY IN SCREEN • Available Key Functions Power Off the Increase the gauge LCD Monitor value of the selected option. Return to last menu Selected to confirm Decrease the gauge value of the selected option. FPM-3190G User Manual... -
Page 45: Rgb Color Menu
C.2.6 RGB Color Menu • Generate Main Menu Select by Left and Right Button, press Menu Button for selection confirmation Select by Left and Right Button, Press Menu Button for selection confirmation • Main Menu -- DISPLAY IN SCREEN • Sub-Menu – DISPLAY IN SCREEN •... -
Page 46: Language Menu
Customization setting for RGB colors C.2.7 Language Menu • Generate Main Menu Select by Left and Right Button, press Menu Button for selection confirmation • Main Menu -- DISPLAY IN SCREEN • Sub-Menu – DISPLAY IN SCREEN FPM-3190G User Manual... -
Page 47: Osd Manager
• Available Key Functions Power Off the Increase the gauge value LCD Monitor of the selected option. Return to last menu Selected to confirm Decrease the gauge value of the selected option. C.2.8 OSD Manager • Generate Main Menu Select by Left and Right Button, press Menu Button for selection confirmation •... -
Page 48: Auto Configuration Menu
C.2.9 Auto Configuration Menu • Generate Main Menu Select by Left and Right Button, press Menu Button for selection confirmation • Main Menu -- DISPLAY IN SCREEN • Sub-Menu – DISPLAY IN SCREEN FPM-3190G User Manual... -
Page 49: Mode Information Menu
• Available Key Functions Power Off the Increase the gauge LCD Monitor value of the selected option. Return to last menu Selected to confirm Decrease the gauge value of the selected option. Auto configuration can be set in menu and also can press the without any menu indication. -
Page 50: Memory Recall Menu
C.2.11 Memory Recall Menu • Generate Main Menu Select by Left and Right Button, press Menu Button for selection confirmation • Main Menu -- DISPLAY IN SCREEN • Sub-Menu – DISPLAY IN SCREEN FPM-3190G User Manual... -
Page 51: Exit Menu
• Available Key Functions Power Off the Increase the gauge LCD Monitor value of the selected option. Return to last menu Selected to confirm Decrease the gauge value of the selected option. C.2.12 Exit Menu • Generate Main Menu Select by Left and Right Button, press Menu Button for selection confirmation •... -
Page 52: Hot Keys
OSD LOCK and UNLOCK setting Entry OSD LOCK MODE Press HOT KEY, the screen will show this action first • Don’t remove the HOT KEY until the screen indicated this task is fin- ished. FPM-3190G User Manual... - Page 53 • Entry OSD UNLOCK MODE • Press HOT KEY, the screen will show this action first • Don’t remove the HOT KEY until the screen indicated this task is fin- ished. Appendix C...
- Page 54 FPM-3190G User Manual...
Need help?
Do you have a question about the FPM-3190G Series and is the answer not in the manual?
Questions and answers