Summary of Contents for Advantech FPM-7211W Series
Page 1
User Manual FPM-7211W Series 21.5" Industrial Monitor with Projected Capacitive Touchscreen, Direct-VGA and DVI Ports...
Page 2
No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.
Page 3
Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defec- tive, it will be repaired or replaced at no charge during the warranty period. For out- of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight.
Page 4
Technical Support and Assistance Visit the Advantech web site at www.advantech.com/support where you can find the latest information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance.
Page 5
The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein.
A.2.11 Exit Menu ..................25 A.2.12 Hot Keys ..................26 Appendix B Touch Driver Installation ....27 Touch Driver Installation ................. 28 Appendix C Setting Serial Data for Expansion ..31 Setting Serial Data for Expansion ............32 FPM-7211W Series User Manual...
Introduction Advantech's FPM-7211W is a 21.5" wide screen color TFT LCD flat panel monitor built specifically for industrial applications. With the its touchscreen,FPM-7211W is an excellent and user-friendly system control interface. In addition to its usual application as an LCD panel monitor, FPM-7211W comes standard with direct VGA and DVI control signal inputs, making it compatible with Industrial PCs and Workstations.
Connectors The following connectors are situated on FPM-7211W Series: VGA Port (DB-15) This DB-15 connector can be connected to the system via the external 15-pin DB-15 connector located on the left side of the system unit. DVI Port (DVI-D) Connected with a standard DVI connector thru I/O port of this unit.
Mounting the Monitor The FPM-7211W Series can be mounted in many different ways. The versatility of the FPM-7211W mounts enable it to be mounted on your desk or anywhere else. 2.1.1 Wall Mounting with FPM-7181W-SMKE Kit FPM-7211W can be mounted directly on a wall with panel mounting brackets. Please refer to Figure 2.1 and follow the following steps to mount FPM-7211W on a wall:...
Screw for the stopper screw out of down side. push the FPM-7211W into panel, stopper screw and snap hook can hold the FPM-7211W. Add panel mount kits in rear side.Fix 10pcs panel bracket around the industrial monitor, refer to the below figure. FPM-7211W Series User Manual...
Desktop, VESA Mount for FPM-7211W 2.1.3.1 Desk top stand with FPM-7211W-SMKE Kit FPM-7211W ccan be mounted as stand in the desk directly by a additional mounting brackets. Please refer to figure 2.2 and follow these steps: Figure 2.2 Desktop Stand FPM-7211W Series User Manual...
Page 20
FPM-7211W has been designed with support for the VESA mount standard. Refer to figure 2.3. Supports 100mm VESA dimension. Please use M4 screws (Length 8mm to 10 mm). Warning! Use suitable mounting apparatus to avoid risk of injury. Figure 2.3 VESA Mount FPM-7211W Series User Manual...
Decrease the gauge value of the selected option. Menu/Sel Activate the OSD menu. Enter/confirm the selected option. Source Changes Input video source A.1.2 LED Function Table A.2: LED Function Blue StandBy/OFF Blue Blinking No Signals Orange FPM-7211W Series User Manual...
Turn off (turn off back- ·Move the selector to the left light) ·Select the sub-menu Select to exit the menu ·Confirm or wait for time-out ·Enter the selected option. ·Move the selector to the right ·Select the sub-menu FPM-7211W Series User Manual...
Main Menu -- DISPLAY IN SCREEN Sub-Menu – DISPLAY IN SCREEN Available Key Functions Power Off the Select to move up/down LCD Monitor Return to the previous Select to confirm menu Select to move up/down FPM-7211W Series User Manual...
Power Off the LCD Mon- ·Select to move up/down itor ·Decrease the gauge value of the selected option Return to the previous Select to confirm menu ·Select to move up/ down ·Increase the gauge value of the selected option FPM-7211W Series User Manual...
Power Off the LCD Mon- ·Select to move up/down itor ·Decrease the gauge value of the selected option Return to the previous Select to confirm menu ·Select to move up/ down ·Increase the gauge value of the selected option FPM-7211W Series User Manual...
Power Off the LCD ·Select to move up/down Monitor ·Decrease the gauge value of the selected option Return to the previous Select to confirm menu ·Select to move up/ down ·Increase the gauge value of the selected option FPM-7211W Series User Manual...
Sub-Menu – DISPLAY IN SCREEN Available Key Functions Power Off the LCD Mon- Move the selector to the left itor Return to the previous Select to confirm menu Move the selector to the right FPM-7211W Series User Manual...
Power Off the LCD Mon- ·Select to move up/down itor ·Decrease the gauge value of the selected option Return to the previous Select to confirm menu ·Select to move up/ down ·Increase the gauge value of the selected option FPM-7211W Series User Manual...
Left and Right Button, and then press Menu Button for selection confirmation. Main Menu -- DISPLAY IN SCREEN Sub-Menu – DISPLAY IN SCREEN Available Key Functions Power Off the LCD Mon- itor Return to the previous Select to confirm menu FPM-7211W Series User Manual...
Sub-Menu – DISPLAY IN SCREEN Available Key Functions Power Off the LCD Mon- Move the selector to the left itor Return to the previous Select to confirm menu Move the selector to the right FPM-7211W Series User Manual...
Generate Main Menu Select by Left and Right Button, , and then press Menu Button for selection confirmation. Main Menu -- DISPLAY IN SCREEN Sub-Menu – DISPLAY IN SCREEN Available Key Functions Select to confirm FPM-7211W Series User Manual...
A.2.11 Exit Menu Generate Main Menu Select by Left and Right Button, and then press Menu Button for selection confirmation. Main Menu -- DISPLAY IN SCREEN Sub-Menu – DISPLAY IN SCREEN FPM-7211W Series User Manual...
Don’t remove HOT KEY until the screen indicated this task is finished. Enter OSD UNLOCK MODE – Press HOT KEY, the screen will show this action first – Don’t remove the HOT KEY until the screen indicated this task is finished. FPM-7211W Series User Manual...
Touch Driver Installation CD Driver supports Windows XP, Windows Vista, Windows 7. For drivers for other operating systems refer to http://home.eeti.com.tw/web20/eg/Touch_Drives.html. Install driver. FPM-7211W Series User Manual...
Page 37
Select touch interface RS-232 or USB. FPM-7211W Series User Manual...
Page 38
Select support Multi Monitor or not. Note! Touch can support multi touch(18.5" 4 point / 21.5" 5 point). Touch already do the default setting, please note that no need to do calibration. FPM-7211W Series User Manual...
Note! Because adjustments may not fit, such as differing magnifying ratios or, in the case that you use it except for the display timing that was preset. Recommend best resolution as 1920*1080. FPM-7211W Series User Manual...