2.2 Desktop, Swing-ARM Mounting
The FPM-3190G Series can be mounted in other ways. You can place the
desktop stand for desktop use or attach it on a swing-arm bracket.
2.2.1 Desktop Stand
The desktop stand brackets are attached to the rear of FPM-3190G.
First loosen the screw in point C. Then unscrew the screw in point A. Pull
down the bracket and use the screw from point A to fasten the bracket in
point B. There should be no screws in point A and point D. Only point B
and C.
A
B
C
Figure 2.4: Desktop Stand for the FPM-3190G series
D
11
Chapter 2