Advantech RS-100-RT User Manual page 54

IDE Primary Master/Slave UDMA [Auto/Disabl ed]
On-Chip Secondary PCI IDE [Enabled/Disabled]
IDE Secondary Master/Slave PIO [Auto/Mode0/Mode
1-4]
IDE Secondary Master/Slave UDMA [Auto/Disabled]
USB Controller [Enabled/Disabled]
USB Keyboard Support [Enabled/Disabled]: Choosing
"Enabled" will allow the system to use USB keyboard
without device driver.
IDE HDD Block Mode [Enabled/Disabled]: Enabled
allows the Block mode access for the IDE HDD
Onboard FDC Controller [Enabled/Disabled]: The
system has an on-board Super I/O chip with a FDD
controller that supports a FDD Drive for 360K/
720K/1.2M/1.44M. Choose "Enabled" to use the on-board
FDD controller for accessing the FDD. Otherwise
choose " Disabled " to use the off-board FDD controller.
Onboard Serial Port 1
[Auto/Disable/(3F8/IRQ4)/(2F8/IRQ3)/(3E8/IRQ4)/(2E8/
IRQ3)]
RS-100-RT User's Manual 53