Advantech RS-100-RT User Manual page 52

Typematic Rate (Chars/Sec): BIOS accepts the following
input values (characters/second) for typematic rate: 6, 8, 10,
12, 15, 20, 24 and 30.
Typematic Delay (msec): Typematic delay is the time
interval between the appearances of two consecutive
characters, when holding down a key. The input values for
this category are: 250, 500, 750, 1000 (msec).
Security Option [System/Setup]: The setting determines
whether the system will boot up if the password is denied.
Access to Setup is, however, always limited. System- The
system will not boot, and access to Setup will be denied if
the correct password is not entered at the prompt. Setup-
The system will boot, but access to Setup will be denied if
the correct password is not entered at the prompt.
MPS Version Control For OS [1.4/ 1.1]
OS/2 selection for DRAM > 64MB[Non -OS2/ OS2]:
Select OS2 if you are running OS/2 Operating System with
greater than 64MB of RAM on the system.
RS-100-RT User's Manual 51