Advantech RS-100-RT User Manual page 23

The description of jumpers on the motherboard
l
CN24-Power Bottom / PCI64 33/66MHz
Jumper Function
1-2 Close to Open Power On
3-4 Closed PCI64 run 33MHz Normal PCI64 run 66MHz
l
J10-Power On for Special Power supply
Jump er Function
1-2 Closed Power bottom on / off
2-3 Closed Power supply switch on / off For 2U single power supply
l
J8-Load default or System reset function
Jumper Function Remark
1-2 Closed Load Default For LED board system-reset bottom (S2)
2-3 Closed System Reset For LED board system-reset bottom (S2)
l
J6- LAN1 & LAN2 LED indicator
Function
On board 82559
LAN1 LED
On board 82559
LAN2 LED
On board 82559
LAN3 LED
Add-on-card Gigabit
LAN1
LED
Add-on-card Gigabit
LAN2
LED
Addon-card Gigabit
LAN3 LED
l
JP1-Alarm board device sensor setting .
Jumper
PIN 1-2,3-4,5-6,7-8,9-10 Closed RS-100-RT One CPU Note1,3
PIN 3-4,5-6,7-8,9-10 Closed
PIN 1-2,5-6,7-8,9-10 Closed
22 RS-100-RT User's Manual
Remark
>0.5 Sec
Remark
For 1U and 2U redundant
power supply
Jumper
PIN 1-2 Closed
PIN 3-4 Closed
PIN 3-4 Closed
Gigabit Lan1 Active LED connect J6 pin2
Gigabit Lan2 Active LED connect J6 pin4
Gigabit Lan3 Active LED connect J6 pin6
Function Remark
RS-100-RT Two CPU Note1
RS-100-RT One CPU Note2,3