Park Position - Husqvarna Viking Platinum 995E User Manual

Table of Contents

Advertisement

Embroidery
Hoop Size
When you have chosen a design, the design width and length numbers will indicate the
size of the hoop to use for that design. Select a dif fer ent hoop size by touching the hoop
button again. Touch the button repeatedly to step between the available hoop sizes. The
design width and length number will show the different hoop sizes. If no other size is
available for the selected design size, the machine beeps and the stitch length and width
numbers will ash.
Be sure to attach the hoop size that is displayed on the screen. A sensor in the em broi dery
arm checks the size of the hoop so you will never make a mistake. If you have attached
the wrong hoop, the hoop size numbers will ash. Insert the hoop shown. This icon is also
used to calibrate the embroidery unit.
: The 40 x 40 "Mini Hoop", the 100 x 100 "Small Hoop", the 100 x 100 "Round Hoop", the
NOTE
170 x 100 "Mid Size Hoop" and the "Endless Hoop", 180 X 130 "Design hoop", 15 x 150 "Do all
quilter's hoop", and the 360 x 150 "Mega Hoop"
are op tion al ac ces so ries (consult your Accessory
User's Guide).
Bobbin Access
When the bobbin is empty, stop your Plati-
num 955E by touching
Access the bobbin area with the embroidery
hoop attached, touch
move away so that you carefully can slide
open the bobbin cover. Once the bobbin
is replaced, touch
hoop back to the stitch position. Pull back
excess top thread. Step backwards a few stitches (page 51). Touch
the embroidery.

Park Position

Remove the hoop and touch the button to put the embroidery unit in parking position for
easy storage in the embroidery unit case.
Menu
Some Embroidery d-Cards have multiple menus, touch
active menu is indicated in the Overview Window.
Size
Touch
to step between the different font sizes on a font Embroidery d-Card. The cur-
SIZE
rently active font size is indicated at the lower left of the InfoDisplay. The size indication
disappears after a few seconds or when a character is selected.
52
/
.
START
STOP
and the hoop will
again to move the
/
START
STOP
to step between them. The
MENU
to resume

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Platinum 775

Table of Contents