Sew Your Program - Husqvarna Viking Platinum 995E User Manual

Functions and InfoDisplay on your Platinum 775
Change or Add a Stitch or Letter
Any stitch or letter can be changed in
PROG
when the cursor is positioned underneath
it. Simply select the correct stitch or letter,
to replace the one you would like to change.
To add a stitch or letter in , move the
PROG
cursor to the position following the one
where you wish to add a stitch. Touch .
CLR
Select the stitch you wish to add. Touch
CLR
to bring up the rest of the program again.
Adjust Stitches in a Program
If you want to adjust a stitch in a pro-
grammed sequence, position the cursor
under the stitch. The last stitch in a pro-
grammed sequence can be adjusted even
though the cursor is positioned after the
stitch. You can adjust the stitch length and
width or mirror image a stitch/letter.
The changes will automatically be stored in
the permanent memory.

Sew your Program

To sew your program, touch to bring
FUNC
up the mode. Presser foot B is recom-
REP
mended. A stop is indicated by a stop sign
symbol.
If you have programmed a stitch sequence
that is too long to be seen on the
InfoDisplay, check it by stepping forwards/
backwards in the sequence using the selec-
tion buttons.
Sew your program on a stabilized piece of
fabric.
Adjust Entire Stitch Program
In you can adjust the stitch length and
REP
width or mirror image the entire program.
The changes will not be saved in the per-
manent memory.
31