Threading For Twin Needle - Husqvarna Viking Platinum 995E User Manual

Threading for Twin Needle

Switch off the main switch.
1. Insert a twin needle. See page 12
"Changing the needle".
2. Use a second thread spool or wind a
bobbin with the thread you are going to
use as the second upper thread.
(
3.
LEFT NEEDLE RED
machine as explained on page 7 and
check to ensure that the thread lies
between the inner thread tension discs,
and inside the last thread guide. Thread
the left needle.
(
4.
RIGHT NEEDLE
auxiliary spool pin. Place the large spool
): Thread the
): Pull up the
LIGHT RED
holder and a felt pad on the spool pin.
5. Place the thread spool or the bobbin
with the second thread on the spool
pin.
6. Thread the machine as before but this
thread should lie between the outer
thread tension discs, and outside the
last thread guide. Thread the right
needle.
Learn your Platinum
9