Husqvarna Viking Platinum 995E User Manual page 53

Step Stitch by Stitch
Touch these buttons to step stitch by stitch through the design. If the top/bobbin thread
have run out or broken, touch
forward stitch by stitch.
: When the buttons are kept de pressed, the stepping speed accelerates.
NOTE
Step Color by Color
When a design includes several colors, use these buttons to step backwards
wards to the beginning of each thread color change.
Check Size and Placement Button
several designs in succession.
When you select a design, the hoop is po si tioned so the needle will begin at the center of
the embroidery area.
Move Design Position
Use the move design buttons to move the design to a different position in the hoop area.
to step back wards a few stitches. Touch
The check size button moves the hoop position to all four corners of
the selected design to outline the size of it. The rst touch brings the
hoop to the upper left corner of the design area (an icon ashes within
the hoop on the InfoDisplay showing the current corner). Each touch
brings the hoop to one of the corners. The fth touch brings the hoop
back to the position of the rst stitch of the design.
The check size function also shows where the design will be sewn on
the fabric. This makes it easier to position designs when embroidering
As you touch the buttons, you can see how the position changes as the
hoop moves.
The limit in each direction is indicated by a beep.
: If you want to change the size of the design, do that rst, before moving
NOTE
the design from the center position. If the design is moved rst and then
enlarged, the size change can be limited by the edge of the embroidery area.
Embroidery
to step
or for-
51