Do you have a question about the 90 and is the answer not in the manual?
Questions and answers
Regina creamer
April 7, 2025
Why my machine is stuck and it won't move
1 comments:
Mr. Anderson
April 9, 2025
If your Husqvarna Viking sewing machine is stuck and not moving, possible reasons include:
1. Thread Jam: Thread may be tangled in the bobbin area or under the needle plate. Remove the bobbin case and needle plate to check for thread buildup.
2. Needle Issues: A bent or incorrectly inserted needle can cause the machine to jam. Replace the needle and ensure it's correctly installed.
3. Improper Threading: Incorrect upper or lower threading can cause tension problems and jamming. Rethread both the top thread and bobbin.
4. Feed Dogs Down: If the feed dogs are lowered, fabric won’t move. Check and raise them if needed.
5. Bobbin Winding Mode: If the machine is in bobbin winding mode, the needle won’t move. Switch it back to sewing mode.
6. Mechanical Obstruction: Lint, debris, or broken parts inside the machine can block movement. Clean the machine and inspect for damage.
7. Motor or Belt Issues: A damaged motor or loose belt can prevent movement. These may require professional repair.
8. Tension Too Tight: Overly tight tension settings can prevent fabric from feeding properly.
Check each of these areas step by step to identify the issue. If the problem persists, servicing may be needed.
This answer is automatically generated
Jeanne G
July 26, 2025
what size bobbins for Husqvarna 150 sewing machine
Isabel Freeman
July 3, 2025
I have the 150 model. Was sewing with no problems. I changed to a zig zag stitch then put the straight stitch back on. It does one stitch and all i get are loops on the underside. I changed the needle and re-threaded all again. Im a new stitcher and need help?
Ashley
March 30, 2025
why it is that when I download this manual every other page is blank? you have all the pages on your website
Need help?
Do you have a question about the 90 and is the answer not in the manual?
Questions and answers
Why my machine is stuck and it won't move
If your Husqvarna Viking sewing machine is stuck and not moving, possible reasons include:
1. Thread Jam: Thread may be tangled in the bobbin area or under the needle plate. Remove the bobbin case and needle plate to check for thread buildup.
2. Needle Issues: A bent or incorrectly inserted needle can cause the machine to jam. Replace the needle and ensure it's correctly installed.
3. Improper Threading: Incorrect upper or lower threading can cause tension problems and jamming. Rethread both the top thread and bobbin.
4. Feed Dogs Down: If the feed dogs are lowered, fabric won’t move. Check and raise them if needed.
5. Bobbin Winding Mode: If the machine is in bobbin winding mode, the needle won’t move. Switch it back to sewing mode.
6. Mechanical Obstruction: Lint, debris, or broken parts inside the machine can block movement. Clean the machine and inspect for damage.
7. Motor or Belt Issues: A damaged motor or loose belt can prevent movement. These may require professional repair.
8. Tension Too Tight: Overly tight tension settings can prevent fabric from feeding properly.
Check each of these areas step by step to identify the issue. If the problem persists, servicing may be needed.
This answer is automatically generated
what size bobbins for Husqvarna 150 sewing machine
I have the 150 model. Was sewing with no problems. I changed to a zig zag stitch then put the straight stitch back on. It does one stitch and all i get are loops on the underside. I changed the needle and re-threaded all again. Im a new stitcher and need help?
why it is that when I download this manual every other page is blank? you have all the pages on your website