Presser Feet - Husqvarna Viking Platinum 995E User Manual

Learn your Platinum

Presser Feet

There are a number of presser feet for different
purposes supplied with your Platinum.
Utility Foot A
Fitted on the machine upon delivery. This foot is
used mainly for straight stitching and zigzag stitch-
ing with a stitch length longer than 1.0.
Utility Foot B
When sewing close zigzag stitches with less than
1.0 mm stitch length; other utility stitches or
decorative stitches use this foot. The tunnel at the
bottom of the foot is designed to feed smoothly
over the stitches.
Buttonhole Foot C
This foot has guide lines to determine buttonhole
length. The middle mark gives a 9/16'' (15 mm)
buttoning edge. The two tunnels on the bottom of
the foot ensures a smooth feed over the button-
hole columns.
Blind Hem Foot D
This foot is used for blind hem stitches. The inner
edge of this foot guides the fabric. The bottom of
the foot is designed to ride along the hem edge.
Zipper Foot E
This foot can be snapped on either to the right or
to the left of the needle. This makes it easy to sew
on both sides of the zipper.
Presser Foot H (Platinum 775 only)
This foot with a glide plate underneath, is used
when sewing foam, plastic, or leather, min i miz ing
the risk of these materials sticking to the foot.
Edging Foot J
This foot is used for overcasting, seam and over-
casting, i.e. stitches which have a stitch width of
5.0 and 5.5 mm. Stitches form over the pin which
prevents puckering at the edge of the fabric.
13