Icons On The Infodisplay; General Icons - Husqvarna Viking Platinum 995E User Manual

Icons on the InfoDisplay

On the InfoDisplay, there are always icons that give you all information you need to attain
the best sewing result possible. Some icons are always active and some appear only at spe-
ci c occasions. The icons visible on the InfoDisplay are listed and explained below.
2. 3. 4.
1.

General Icons

1. The set
SPEED
2. Indicates if the
set to up or down.
3. Indicates that
active.
4. The recommended
shown here.
5. Indicates that the
vated.
6. Indicates that the
vated.
7. Indicates the active
8. Overview Window
Indicates which menu is active, stitches or
any of the alphabet menus.
STITCH MENU
CAPITAL LETTERS
LOWER CASE LETTERS
NUMBERS
9. The selected
STITCH NUMBER
here.
10.The set
STITCH WIDTH
5. 6.
12. 11.
is shown here.
NEEDLE STOP POSITION
MIRROR SIDE TO SIDE
PRESSER FOOT
function is acti-
STOP
function is acti-
FIX
SEWING MODE
/
SPECIAL CHARACTERS
is shown
is shown here.
Functions and InfoDisplay on your Platinum 955E
7.
10.
11.Indicates that
For Darning Stitch (number 15), Taper-
is
ing Stitch (number 16) or when sewing
step by step buttonholes, a ashing icon
is
indicates that you need to touch
to change direction.
is
12.The set
STITCH LENGTH
.
8.
9.
is active.
REVERSE
REVERSE
is shown here.
39