Infodisplay Icons When Embroidering - Husqvarna Viking Platinum 995E User Manual

InfoDisplay Icons when Embroidering

Presser foot down
A ashing presser foot icon indicates that the presser
foot should be raised or lowered
Calibrate
A ashing " " within a hoop icon prompts you to
remove the hoop and touch
page 46.
Embroidery d-Card
A ashing d-Card icon prompts you to insert an
Embroidery d-Card.
1. A icon indicates that Platinum
STOP
955E stops after each color. If the stop
function button is cancelled no stop is
displayed and Platinum 955E embroiders
in one color only.
2. Use
EMBROIDERY FOOT U
that the lever of the foot shall be in posi-
tion a, " " indicates position b (see
page 45).
3. The " " indicates the
of the design. As you rotate the design, you
can see how the " " rotates.
4. Overview Window: when an Embroidery
d-Card with several menus is inserted, the
CURRENT MENU
5. Thread
COLOR NUMBER
number next to the thread spool indicates
color change. A ashing "E" next to
the thread spool indicates that the top/
bobbin thread has run out or broken.
6. A
FLASHING SCISSORS
to cut the start thread tail.
to calibrate, see
1. 2.
9.
. " " indicates
position
ROTATION
is indicated here.
. A ashing
icon prompt you
3.
8.
7. Indicates the selected
A " " in the InfoDisplay indicates
that no design is selected.
8. Indicates the
design. Can be adjusted with the stitch
width buttons.
9. Indicates the
design. Can be adjusted with the stitch
length buttons.
Note: The design width and length number can
also indicate the recommended hoop size. Once
you have chosen a design and touched the select
hoop icon, the recommened hoop size will be
shown instead of the width and length of the
design and the square inside the hoop icon will
ash. Read more about how to change the hoop
size on page 50.
Embroidery
4.
7.
DESIGN NUMBER
(in mm) of the
WIDTH
(in mm) of the
HEIGHT
5.
6.
.
49