Piping Foot - Husqvarna Viking Huskylock 901 Operating Manual

Wrong side
Right side
Wrong side
Right side

7-2. Piping Foot (1650002-460)

Piping foot is used with 4-thread 2-needle overlock
sewing.
(1) Replace the regular foot with the piping foot
(see p. 5).
(2) Place the piping with its welt/cord edge
opposite the seamilne, between two fabrics
with the right sides together.
(3) Place your fabric under the foot, making sure
the welt/cord part of the piping is in the groove
underneath the presser foot.
(4) Begin with the piping extending beyond the
fabric to make sure the fabric and the piping
are properly fed.
Continue to sew on the fabric.
(5) After sewing, open the fabric and the piping is
complete.
–28–