CONNECT FOOT CONTROL AND POWER SUPPLY
Foot control to use with this machine:
Before plugging your machine in, make sure the voltage is the same as
to country.
1.
Connect the foot control/electric power cord to the socket on the
machine.
2.
Plug the power cord plug into the electric outlet.
4.
Press the foot control to start sewing. Use the foot control to adjust the
sewing speed. The harder you press, the faster the machine will sew. To
stop the machine from sewing, remove your foot from the control.
the sewn result.
outlet. Do not modify the plug in any way.
GET TO KNOW YOUR HUSKYLOCK™
1 – GET TO KNOW YOUR HUSKYLOCK™
1
21
S
A
21
7
S