Stitch Length Adjustment; Sewing Curved Seams - Husqvarna Viking Huskylock 901 Operating Manual

Stitch Length Adjustment

The machine is pre-set to 2.5mm stitch length for
regular seaming and overlock. You may adjust the
stitch length from 1mm (narrow rolled hemming)
to 5mm by adjusting the stitch length adjustment
lever.
❈ For normal overlock, set the stitch length from
2.5mm to 4.4mm. A stitch length less than
2.5mm is used only for rolled hemming.
❈ Adjust the stitch length according to the fabrics
and threads (see table on p. 21).

Sewing Curved Seams

For inside curves, guide the fabric gently with the
trimming line of the fabric under the right front of
the presser foot.
By applying pressure to the fabric with your left
hand, at the same time, apply a little pressure
in the opposite direction with your right hand as
shown.
For outside curves, apply pressure in the opposite
direction of the above.
–15–