Blind Hem Foot (0.5Mm / 1.0Mm) - Husqvarna Viking Huskylock 901 Operating Manual

Wrong side
Final hem length
Screw for guide
Wrong side
Final hem length
Right side
Guide
–30–

7-4. Blind Hem Foot (0.5mm / 1.0mm)

(1650002-440 / 1650012-440)
There are two sizes of blind hem foot. The foot
marked 0.5 is used for fine to medium fabrics and
1.0 is for medium to heavy fabrics.
• They are used with 4-thread 2-needle overlock
sewing.
(1) Replace the regular foot with the blind hem foot
(see p. 5).
(2) Fold the fabric as illustrated.
(3) Set the stitch length to 4-5, and the stitch width
to 5.5. Place the fabric under the blind hem
foot.
Loosen the guide screw to adjust the guide on
the foot, so that the left needle just catches the
fold.
(4) When correctly set, sew the hem. After
completion, open the fabric. The stitches
should be almost invisible on the right side of
the fabric.