3-Thread Overlock Stitch Using 1 Needle - Husqvarna Viking Huskylock 901 Operating Manual

3-3. 3-Thread Overlock Stitch Using 1 Needle

Though this machine is used mainly for 4-thread
overlock using 2 needles, 3-thread overlock 1
needle can be easily operated by just removing
either needle.
Use 3-thread stitch for decorative purposes.
(1) Removing the right needle:
Create a wide 3-thread stitch by using only the left
needle and the left thread tension (Dial
The differential feed is normally set at "N" (see p. 13).
(2) Removing the left needle:
Create a narrow 3-thread stitch by using only
the right needle and the right thread tension (Dial
).
The differential feed is normally set at "N" (see p. 13).
).
–17–
Left
needle
Right
needle
➀
➁