Opticon PHL-7100 User Manual page 99

Once you have established an account, create a new
connection on your device. When creating this connection, you
should be able to use all of the default TCP/IP settings provided
in the Make New Connection Wizard. If you can't connect using
the default settings, contact your ISP or access your ISP's Web
site for specific TCP/IP information as well as primary and
secondary DNS address.
Modify connection setting
Table 3-19 Network and Dial-up Connections
Figure 3-55 Network and Dial-up Connections
Select Start > Settings > Network and Dialup
Connections
Select the icon for connection settings you want to
modify.
Select File > Properties, or double- tap the appropriate
icon.
Select desired options. There may be additional settings
that depend on the connection. To modify, select the icon
and select the icon and select Advanced Settings...
from the menu.
Figure 3-56 Network and Dial-up Connections
3-36
OPTICON
User's manual
PHL-7000 series