Opticon PHL-7100 User Manual page 77

3.2.1.5 Read Mode TAB
With this option several read modes can be changed.
Figure 3-17 Read mode options.
Field name
Trigger repeat
Redundancy
This option makes it more easy to select a single bar code from a
sheet filled with barcodes. If the trigger switch is pressed once,
the laser beam is on during the configured read time. The laser
beam can now be moved to the required bar code. If the trigger
switch is pressed again, the bar code is decoded and transmitted.
If the read time timer expires, the laser switches off and the
trigger sequence should be repeated. If the read time is set to
zero, then if the trigger switch is pressed, the laser is on, but does
not accept bar codes. As soon the trigger switch is released, the
barcode is decoded and transmitted. Default is disabled.
This is the number of times that a label must be correctly
decoded before it is transmitted. Selecting a higher redundancy
count makes reading slower, but is reduces the probability of
reading errors, especially when labels of poor definition are used.
Description
3-14
OPTICON
User's manual
PHL-7000 series