Charging The Battery Pack With Power Adapter - Opticon PHL-7100 User Manual

2.3.2 Charging the battery pack with Power Adapter

1. Connect the power cord to the power adapter.
2. Plug in the connector of the power adapter to the PDT.
3. Connect the power cord to a power source.
Figure 2-11 Charging with power adapter (PHL-7100 shown)
4. Charging time: to charge the battery pack for the first time, it needs approximately 6 hours.
Subsequent charging time is approximately 4 hours.
• When charging the battery pack, the charge LED indicator on the PDT turns on Red.
• After the battery pack is fully charged, the charge LED indicator turns to Green.
2-10
OPTICON
User's manual
PHL-7000 series