Opticon PHL-7100 User Manual page 24

1 Bar code reader LED
indicator
2 Charge LED indicator
3 LCM / touch panel
4 Left scan key
Right scan key
Scan key
5 Power key
6 F1 ~ F4 key
7 Navigation key
8 Alpha-Numeric keys
9 Alpha key
10 Fn key
11 Enter key
12 Earphone Jack
Connector
13 USB / RS232
Synchronization port
14 Scan window
15 Stylus
16 Battery Cover
17 Battery cover latch
18 Hand Strap
19 Speaker
20 DC Power Jack
21 End Cap
Table 2-1 Description of PHL-7100 General View
"Red" color Bar code reader on
"Green" color Successful reading
"Red" color Charging battery
"Green" color Battery fully charged
User input on touch panel by stylus
Start scanning bar codes by pressing any of these
three scan keys
Put the PDT into suspend mode
Awake the PDT from suspend mode
Application keys, hot keys of application program
defined by end user.
Navigation keys for left, right, up and down
directions
Numeric keys, change to alpha keys
Toggle alpha-mode for alpha-numeric keys
This key is used in combination with other keys to
type special characters and perform system
functions.
This key confirms data entry
Connector input for earphone set
A connector to support USB host, client and RS232.
Bar code reader window
Use the stylus for selecting items and entering
information.
Protect battery pack and remain IP54 rating
To keep battery cover locked
This strap can be sealed tighter or looser
1.5W speaker for audio output
A connector to input power suppy to PDT.
Protect CF slot and SD slot from dust and water
2-5
OPTICON
User's manual
PHL-7000 series