Opticon PHL-7100 User Manual page 31

b) Place the spare battery pack into the IRU-7000's spare battery charging slot :
1. Connect the power cord to the power adapter
2. Plug in the connector of the power adapter to the IRU-7000
3. Connect the power cord to a power source
4. Insert the battery pack into the IRU-7000 spare battery slot
• When charging the battery pack in the IRU-7000 spare battery slot, the IRU-7000
charging LED indicator turns on Red.
• After the battery pack is fully charged, this LED indicator turns to Green.
CAUTION: Do not remove the battery pack too long from PDT after you have already
full-charged the battery pack and backup battery pack and start to use the PDT.
Otherwise the data stored inside SDRAM memory will be lost. Please also keep in mind
power the PDT off if you want to change the main Battery pack.
2-12
OPTICON
User's manual
PHL-7000 series