Bluetooth Device Properties - Opticon PHL-7100 User Manual

3.2.2 Bluetooth Device Properties

ICON ITEM & FUNCTION
"Scan Device" Tab (Figure 3-20) :
•
Tap the Scan Device button to initiate a scan for Bluetooth
devices. The Bluetooth manager lists the Bluetooth devices
that it finds, see Figure 3-21. If Bluetooth hardware is not
found in the PDT, the Bluetooth Hardware Error window
appears, see Figure 3-22. Table 3-7 describes the
Bluetooth Icons.
Double tap the device to connect to on the device list. The
Bluetooth Manager Authentication window appears. Tap
No to connect to the device without authentication, or tap
Yes to authenticate the device before connecting. (Figure
3-23)
If the Yes button was selected in the Bluetooth Manager
Authentication window, the enter PIN windows appears.
Enter a PIN (between 1 and 16 alpha numeric characters)
in the Enter PIN: text box, and tap OK. The mobile
computer sends the PIN request to the device for bonding.
(Figure 3-24)
When prompted, the same PIN must be entered on the
other device. When the PIN is entered correctly on the
other device, the bonded icon
list. (Figure 3-25)
Table 3-6 Bluetooth Device Properties
appears on the device
3-17
OPTICON
User's manual
PHL-7000 series