Remote Connection - Opticon PHL-7100 User Manual

5.2.7 Remote Connection

Using Remote Desktop Connection, you can log on to Windows Terminal Server and use all
programs installed on this server. For example, instead of running Microsoft Pocket Word, you
can run the desktop version of Microsoft Word.
5.2.7.1 Connecting to Terminal Server
Select Start > Programs > Remote Connection,
or run 'CETSC' from the command prompt.
In the Server box, type or select a Terminal Server
name or TCP/IP address, or select a server in the
drop-down list.
Select Connect.
In the Remote Connection window, type your
user name, password, and domain(if required),
and then select OK.
5.2.7.2 Disconnecting Without Ending a Session
In the Remote Connection window, select Start > Shutdown.
Select Disconnect > OK.
Note: If you previously disconnected from a Terminal Server without ending the session, the
Terminal Server will continue to execute any running processes and Remote Connection
can later reconnect to this same session(if your administrator has configured Remote
Connection to reconnect to disconnected sessions).
5.2.7.3 Disconnecting and Ending a Session
In the Remote Connection window, select Start > Shutdown.
Select Log Off > OK.
Figure 5-4 Remote Connect
5-21
OPTICON
User's manual
PHL-7000 series