Subscribe to Our Youtube Channel
Related Manuals for Crystal Mountain Summit
Summary of Contents for Crystal Mountain Summit
- Page 1 SUMMIT POU Water Dispenser User Manual...
- Page 2 1. POU Top Cover 2. Hot Water Faucet (with Child Safety Feature) 3. Cold Water Faucet 4. Cook Water Faucet (room Temperature Water) 5. Drip Tray 6. Reset Button 7. POU Kit Parts may not appear exactly as shown...
-
Page 3: Operation
THANK YOU FOR BUYING A CRYSTAL MOUNTAIN WATER COOLER! RECEIVING Inspect the cooler box for any evidence of shipping or handling damage. In case of shipping damage, claims should be filed promptly with the carrier. Please note that the carrier will not accept claims for any damage discovered after the signing for UNINSPECTED GOODS. - Page 4 4. Do not draw water from the cooler for about 30 minutes to let the water cool or heat (Figure 5). Optimum water temperatures will be reached after several hours of operation (Figure 6). Figure 6 Figure 5 5. Ensure the following when cooler is to be serviced: 5.1 Turn off Hot Tank Switch (Hot &...
- Page 5 3. Remove the POU Cover (if installed) (Figure 16) Use the fingertips of both hands to press on the POU Lid Assembly and turn counter clockwise till it is free from the cooler opening. (Figure 17, Figure 18) Lift off of the cooler, and set aside.
- Page 6 R, P, & G Series On Cook & Cold and Hot & Cold models the reservoir can be removed easily by following the steps given below. 1. Unplug (Figure 27) and approach the cooler from the front. 2. Turn off the water supply via the shut off valve, and disconnect the water supply from the cooler. (Figure 28) Figure 27 Figure 28 3.
- Page 7 CLEANING Do Not Immerse the Unit in Water for Cleaning Remove any dust or contaminants from the cooler by rinsing the cold water reservoir and faucets with clean water prior to use. IMPORTANT: Stainless steel surfaces require special cleaning products and treatment (Figure 39 and Figure 40).
-
Page 8: Installation
<Figure 42> Standup Series Bracket Installation Instructions INSTALLATION 1. Remove the two mounting screws that secure the Bottom Plate to the outer enclosure. 2. While holding the "S" shaped bracket against the cooler (refer to diagram) reinstall and tighten the bottom plate/outer enclosure screws securely. 3. - Page 9 WARNING: The warranty and Underwriters’ Laboratory and CE listings for the coolers are invalidated if any alteration, modification, or use or misuse in combination with any other machine or devices is deemed to be the source of any claim. The manufacturer accepts no liability (including for bodily injury) resulting from any alteration, misuse, neglect, accidents, improper installations or repairs.
Need help?
Do you have a question about the Summit and is the answer not in the manual?
Questions and answers
How to adjust temperature on MOGD2WTW2Cmodel