Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Crystal Mountain K2
Summary of Contents for Crystal Mountain K2
- Page 1 Water Dispenser User Manual...
- Page 2 CrystalFlo LED Cold LED Cook / Hot LED LED Indicator Lights CrystalFlo Water Cartridge FEATURES 1. LED Indicator Lights Cold LED ( Blue – On when cooler is connected to power) Cook / Hot LED ( Green – GREEN – C&C Model or Hot Tank Switch in OFF position – –...
-
Page 3: Getting Started
THANK YOU FOR BUYING A CRYSTAL MOUNTAIN WATER COOLER! GETTING STARTED Receiving Inspect the cooler box immediately and carefully for any evidence of shipping or handling damage before signing to receive goods. In case of shipping damages, claims should be filed immediately with the carrier. - Page 4 Provide Electricity Ensure that the available power supply matches the cooler’s voltage specifications indicated on the nameplate label (located at the top/rear of unit). Plug power supply cord into receptacle. Please ensure that cooler is set up so as access to the power outlet and plug is unobstructed. Note: To provide additional protection from the risk of shock, this unit MUST be connected to a ground fault circuit interrupter (GFCI) outlet at all times.
- Page 5 Optimum hot water temperatures will be reached after 20-30 minutes 1. Position bottle, glass or other container below water outlet 2. Push the lever upwards (Figure 11), (Figure 12), and depress faucet lever to dispense water (Figure 13) 3. Release hot water lever once desired fill level is achieved Figure 11 Figure 12 Figure 13...
- Page 6 3. Please recycle the CrystalFlo whenever possible, otherwise dispose of responsibly 4. Ensure seal is properly installed on the Inlet/Outlet tube of the CrystalFlo Water Cartridge assembly (may have shifted during shipment or un-packaging) 5. Align CrystalFlo Water Cartridge with openings in cooler, and push downwards into place (Figure 22). Ensure that foam seal is pushed down and seals the reservoir completely.
- Page 7 SAFETY PRECAUTIONS WARNING To reduce risk of injury and property damage, user must read this entire guide before assembling, installation and operation of the dispenser. Failure to follow the instructions in this manual can cause personal injury or property damage. This product dispenses water at very high temperatures.
- Page 8 Services Required: See nameplate located at the top/rear of the dispenser The customer acknowledges that water, like other liquids, can cause damage to surfaces. The customer takes full responsibility for placing the cooler within a residence or business, and acknowledges that failure to address drips, leaks or spillages is at the customer’s risk.
Need help?
Do you have a question about the K2 and is the answer not in the manual?
Questions and answers