Motion Detection - Unisight TZHEF04 Series User Manual

Digital Video Network Surveillance System
Step 4: Setup alarm schedule: You can setup working schedule. Only when the
video loss is happened in the schedule, DVR will response.
Note: The 4 time periods can not be repeated. Please reboot DVR to make
parameters become effective.
Step 5: Setup alarm policy: You can select one or more response solutions,
including "On Screen Warning", "Audible Warning", "Upload to Center" and
"Trigger Alarm Output". You can use [↑] [↓] and [EDIT] key to enable or disable
them. "×" is disable and " " is enable.
Step 6: Save alarm setup: After your setup, press "Confirm" button and return
"Advanced setting" interface. Press "Confirm" button to save current camera
parameters and return main menu.
Step 7: Save all cameras: If you want to setup other cameras, please repeat from
step2 to step 6. In "Camera" menu, press "Confirm" key to save all cameras
parameters. Press "Cancel" button or [ESC] key to abort.

5.10 Motion Detection

If you enable this function, when there is motion being detected, DVR will
display alarm in the status bar on the screen.
Fig. 5.17 Video signal loss handle setup
Unisight Digital Technologies, Inc
45