Preview - Unisight TZHEF04 Series User Manual

Digital Video Network Surveillance System
Handle" menu, you can select one or more record channels. Please use [ENTER] or
[EDIT] key to enable the flag into " ".
Note: In order to make the cameras start recording, in "Recording" menu,
you must enable recording schedule and set "Rec Type" as "Motion Detection"
or "Motion | Alarm". Please refer to chapter 5.12 for recording setup.
Step 7: Motion alarm schedule: When the motion alarm is happened in
schedule, DVR will response such as "On Screen Warning", "Audible Warning",
"Upload to Center" and "Trigger Alarm Output". You can setup 4 time periods for one
day and 7 days for one week.
Note: Time periods in one day can not be repeated.
Step 8: Motion alarm handle method setup: You can select one or more
handle methods such as "On Screen Warning", "Audible Warning", "Upload to
Center" and "Trigger Alarm Output".
Note: If "On Screen Warning" is enabled, when there is motion alarm
happened and DVR is in preview mode, DVR will switch to the related camera.
If you trigger more than one camera, DVR will pop-up them one by one every 10
seconds. When the motion alarm is disappeared, DVR will restore preview mode.
Step 9: Save motion alarm setup: Press "Confirm" button to return "Image
Setup" menu. In the "Image Setup" menu, press "Confirm" button to save the current
camera parameters.
Step 10: Save all cameras: You can repeat from step2 to step8 to setup motion
detection parameters for other cameras. Also you can copy the parameters of one
camera to any other cameras.
Note: Motion alarm area can not be copied.
If you want to disable motion alarm area and motion alarm policy, you just need
to select the motion alarm sensitivity as "Off".

5.11 Preview

After the device started, the preview screen will be seen; then you can press
"PREV" key to switch between one screen and four screens; also you can switch to
the other single screen by pressing "EDIT"; or in "SHIFT" mode you can press
numeric keys to switch to the screen no. you want.
In "Preview" menu, you can setup preview mode, screen switch time, enable or
Unisight Digital Technologies, Inc
48