Unisight TZHEF04 Series User Manual page 60

Digital Video Network Surveillance System
Advanced setup descriptions:
Mac: The physical address of the device, which can not be written.
NIC type: Default is "10M/100M Auto", the other options are: 10M Half-Dup,
10M Full-Dup, 100M Half-Dup and 100M Full-Dup.
IP server address: If DVR uses PPPoE function, and get one dynamic IP
address. If you set DNS IP with one fixed Internet IP, DVR will send some
information such as DVR name, DVR serial number, DVR current IP to that fixed IP
address. We -call that fixed Internet IP as DNS IP. The DNS server with that fixed
Internet IP can receive DVR information and used to resolve DVR dynamic IP. This
IP server is special software, not the normal domain name server. You can use the
provided SDK to develop this DNS software.
Multicast IP: It is one D-class IP address, among 224.0.0.0 --- 239.255.255.255.
If you do not use multicast function, you do not need to set. Some routers will
prohibit multicast function in case of network storm.
Remote Host IP and Port: If you set this IP and port, when there is an alarm
and exception happened, DVR will send information to that host IP. The center with
this IP can receive alarm and exception information from DVR. You can use SDK to
develop this center software.
PPPoE: DVR support PPPoE dial-up function. As Fig.5.30 shown below:
Fig. 5.29 Advanced network setup
Unisight Digital Technologies, Inc
60