Manual Record - Unisight TZHEF04 Series User Manual

Digital Video Network Surveillance System
Note: The PTZ preset number has been set already. Please refer to PTZ
menu for preset setup. V2.0 firmware can support 128 preset at most.
Start/Stop auto function in PTZ control mode
In PTZ control mode, press [PLAY/AUTO] key to start PTZ auto function. Press
[PLAY/AUTO] key again to stop.
When PTZ is in auto mode, if you exit PTZ control mode, PTZ will continue
auto function unless you enter the PTZ control mode again, and press [PLAY/AUTO]
key to stop.
Exit PTZ control mode
Press [ESC] or [ENTER] to exit and return to the preview mode.
4.6

Manual Record

Note: The user must have the corresponding right, DVR has HDD and HDD has
been formatted already.
Manual record
In preview mode, press [REC] key, in the pop-up login dialog, select the name
and input the correct password, you can enter the "Manual Record" interface.
In menu mode, press [REC] key to enter the "Manual Record" interface directly.
Unisight Digital Technologies, Inc
23